Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

implementingg Load Balancing betweet two ISP routers

Does the BGP load balance internet bandwidth if used to two different ISP's ? Can EIGRP do Load Balance if run between my default gateway router and the ISP's routers ?

2 REPLIES
Gold

Re: implementingg Load Balancing betweet two ISP routers

Loaded question.... with lots of different answers. It depends on what you mean by load balancing. Outbound traffic is pretty easy--there are several schemes that will get you there with or without bgp, including using an igp, such as eigrp (or ospf, or isis, or even rip if you _really_ wanted to do that). Inbound is another problem altogether, over which you don't have a ton of control, though there are some things you can do....

Russ

New Member

Re: implementingg Load Balancing betweet two ISP routers

I ment utilizing two T1 lines for internet access.Currently only one providor is used through a 2600 Router to a PIX515 to another default gateway 2600 router for the internal private network.I have some VPN users hitting the PIX for internal access.E mail is comming through my existing T1 line. And I have a full T1 line unused.

264
Views
0
Helpful
2
Replies
CreatePlease login to create content