I lost power and my router rebooted after the UPS ran out of juice. I had it configured and since it reboot it lost all the changes I made. I need desperately to get this up and running ASAP. My problem is that I need to set up the ACLs so that the rest of the world can get in and see my web site and send me mail. My config is as follows:
Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname router
!
memory-size iomem 15
ip subnet-zero
ip domain-name xxxxxxxxxx.xxx
ip name-server 10.0.10.10
!
!
!
!
!
interface FastEthernet0/0
description connected to Internet
ip address 123.456.789.0
no ip directed-broadcast
ip nat outside
!
interface FastEthernet0/1
description connected to FastHub424
ip address 10.0.0.1 255.0.0.0
no ip directed-broadcast
ip nat inside
!
router rip
version 2
passive-interface FastEthernet0/0
network 10.0.0.0
no auto-summary
!
ip nat inside source list 1 interface FastEthernet0/0 overload
ip classless
ip route 0.0.0.0 0.0.0.0 FastEthernet0/0
no ip http server
!
access-list 1 permit 10.0.0.0 0.255.255.255
!
no scheduler allocate
end
Any suggestions?
As it stands right now I can get to the outside world but no one can get in to see my site and mail can not get in that is destined for my domain.
