Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

inbound load sharing

I have a 2600 router ,I wish get load sharing use T1 + DSL line.

This is impossible use BGP in my ISP,somebody told me I can use

two DNS server to do load sharing,but I don't know how to do detail.

I haven't no money to use like linkproof box,my topology is DMZ connect

a PIX,PIX connect a 26 router,I have a web server and wish obtain inbound load sharing,router s0 connect T1 and F1 connect ADSL,anybody can tell

me how to do it?

I set one DNS have my web server A record:example 100.100.100.100 -(T1 ip space)

another DNS have the same web server A record:200.200.200.200-(DSL ip space)

When anyone research my web,if T1 congested,the response from first DNS will slower,and he will come in from DSL line,isn't it?

I trust I have miss something,please tell me how to do !

thankx a lot!

1 REPLY

Re: inbound load sharing

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.

121
Views
0
Helpful
1
Replies
CreatePlease to create content