05-28-2003 04:53 AM - edited 03-02-2019 07:41 AM
We just increased our frame relay from 512 to 768 at one location and from 256 to 512 at another location. We have cisco 2612 routers with serial interfaces to our TSU/CSU 120. Do we need to do any configuration to our cisco routers to see the new channels that were opened? Any help is appreciated. Thanks. Robbie
05-28-2003 05:48 PM
If the router is configured to use specific channels via the "service-module t1 timeslots" command, you'll need to update this setting.
05-28-2003 05:56 PM
yes, you will need to configure 12 slots for 768 and 8 slots for the 512 k upgraded circuits..
Check this link
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/inter_r/irdshoap.htm#1032031
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide