Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Increasing Bandwidth on Frame Relay

We just increased our frame relay from 512 to 768 at one location and from 256 to 512 at another location. We have cisco 2612 routers with serial interfaces to our TSU/CSU 120. Do we need to do any configuration to our cisco routers to see the new channels that were opened? Any help is appreciated. Thanks. Robbie

2 REPLIES
Bronze

Re: Increasing Bandwidth on Frame Relay

If the router is configured to use specific channels via the "service-module t1 timeslots" command, you'll need to update this setting.

Re: Increasing Bandwidth on Frame Relay

yes, you will need to configure 12 slots for 768 and 8 slots for the 512 k upgraded circuits..

Check this link

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/inter_r/irdshoap.htm#1032031

92
Views
0
Helpful
2
Replies
CreatePlease to create content