Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

info in interface brief

hi

it may be simple but why its showing manual,NVRAM,TFTP for different interfaces ??

FastEthernet2/0 YES manual up up

FastEthernet2/1 unassigned YES NVRAM administratively down down

Virtual-Access1 unassigned YES TFTP down down

regds

prem

2 REPLIES
Silver

Re: info in interface brief

This defines the method by which the interface was configured, manual indicates that someone has entered config mode and configured the interface, NVRAM indicates that the interface was configured from memory (usually when the router was reloaded) and TFTP indicates that the config for the interface was TFTP'd into the router.

Re: info in interface brief

Hi

I made this int manually down then y its showing TFTP ,it shuld show manual .pls clear this point..

Serial4/0 unassigned YES TFTP administratively down down

Regds

prem

96
Views
0
Helpful
2
Replies