The 2500 W AC supply has an AC-input current of 16 A maximum at 200 VAC at 2500 W output and 16 A maximum at 100 VAC at 1300 W output. This information is availale in form a table at http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/6000hw/inst_aug/02prep.htm. If you are ultimately trying to figure out the power requirements for each line card, that information too is also available in the same document. Also, take a look at the section "Catalyst 6500 Series Power Supplies" in the document
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...