Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Installing WIC-1ENET on a 1750 router

Hi.

I'm installing a WIC-1ENET on a 1750 router that seems to follow all the Cisco guidelines and still get the following:"00:00:08: %PQUICC-1-UNKNOWN_WIC: PQUICC(0), WIC card has an unknown ID of 0x39"

The card is installed on port 1 which is OK with our IOS version.

I did not find what I have to do in order to get this card to work.

Any help would be appreciated.

Thanks

Amir

3 REPLIES
Silver

Re: Installing WIC-1ENET on a 1750 router

What IOS do you have loaded, you need a minumun of 12.1(5)YB, 12.2(2)XH, 12.2(2)XJ, 12.2(2)XK, 12.2(2)XQ, 12.2(4)T, 12.2(8)T, 12.2(8)YJ, 12.2(8)YL, 12.2(8)YM, 12.2(8)YN, 12.2(11)T, 12.2(11)YU, 12.2(11)YV, 12.2(13)T, 12.3(1) to support the WIC-1ENT in a 1750

Community Member

Re: Installing WIC-1ENET on a 1750 router

We have 12.2(17)on a cisco 1750 (MPC860) processor (revision 0x601) with 36864K/12288K bytes of memor

y.

Do I have to get an IOS upgrade before the Card would work?

Thanks

Amir

Community Member

Re: Installing WIC-1ENET on a 1750 router

WIC-1ENET is supported on the 1750 in the following versions (and newer):

12.1(3)XT, 12.1(5)YB, 12.2(2)XH, 12.2(2)XJ, 12.2(2)XQ, 12.2(4)T, 12.2(4)XL, 12.2(8)YJ, 12.2(8)YL, 12.2(8)YM, 12.2(8)YN, 12.3(1)

You can get this kind of info (and more) from the Software Advisor at http://www.cisco.com/cgi-bin/Support/CompNav/Index.pl

HTH,

-A

145
Views
0
Helpful
3
Replies
CreatePlease to create content