Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Installing WIC in 1601

What would cause the following error when installing a T1 DSU/CSU WIC in a 1601 Version 11.3(11a

00:00:08: %C1600-4-BADINTFC: Interface 2, (0-1 Onboard interfaces 2=WIC)

Invalid interface (Unknown, Uninitialized or Bad Cookie value read)

2 REPLIES
Bronze

Re: Installing WIC in 1601

HI

Here is the output of the error message you got:

C1600 Messages

The following are Cisco 1600 platform error messages.

Error Message

%C1600-4-BADINTFC: Interface [dec], (0-1 Onboard interfaces 2=WIC)

Invalid interface (Unknown, Uninitialized or Bad Cookie value read)

Explanation The router is functional; however, there is an interface that the software does not recognize.

Recommended Action Copy the error message exactly as it appears on the console or in the system log, contact your Cisco technical support representative, and provide the representative with the gathered information.

So it is probably a software problem.

Hope that helps

Roger

Gold

Re: Installing WIC in 1601

monkp,

As Roger says, it's probably a software problem: it sounds like your IOS doesn't recognize the interface.

The WIC-1DSU-T1= is supported by IOS 11.2(12)P and up, 11.3(3)T and up, and all 12.x versions. If your 11.3(11a) doesn't have a "T" after it, then that WIC is not supported

If you do a "show flash" what is the c1600- software image file you are loading?

Hope this helps.

107
Views
0
Helpful
2
Replies
CreatePlease to create content