Interconnect 3 PVCs into 85xx MSR

[rv1125]

Hi all!

Can i interconnect 3 ADSL users inside 8540 MSR or 8510 MSR? The users use Ethernet RFC1483 bridging. If i can, than how?

[ebreniz]

I assume the below scenario . This is regarding interconnecting 3 users.

PC -- 802.3 -- ADSL Router (RFC 1483 Bridge) ---ATM PVC ----- 85xx MSR

| |

PC -- 802.3 -- ADSL Router (RFC 1483 Bridge) ---ATM PVC -------| | |

|

PC -- 802.3 -- ADSL Router (RFC 1483 Bridge) ---ATM PVC ----------|

yes, It is possible to interconnect 3 ADSL users having RFC 1483 bridging. The functionality that you need in the 85xx MSR router is (1) Bridging the routed packets and (2) routing the bridged frames. This is achieved using following methods

1) Using Routed Bridging Encapsulation (RBE)

http://cisco.com/en/US/products/hw/routers/ps202/products_configuration_example09186a0080093e2f.shtml

2) Using Integrated Routing & Bridging (IRB)

http://cisco.com/en/US/tech/tk175/tk15/technologies_configuration_example09186a008009452a.shtml