Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

interface virtual access/virtual-template

hi all

whts the purpose of creating or configuring these 2 interface?whts the function of these interfaces ?

thx

prem

1 ACCEPTED SOLUTION

Accepted Solutions

Re: interface virtual access/virtual-template

When configuring virtual dialer profiles, the virtual-template interface acts as a general placeholder for parameters you want to asign to dial-in users.

When a user dials into your NAS, a virtual-access interface is "cloned" from the virtual-template interface. The rest of the parameters, access-lists, ip address, routing info, etc, can be asigned from your AAA server for the specific user that dials into the NAS.

Take a look at the following links:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fdial_c/fnsprt8/dafvrtmp.htm

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fdial_c/fnsprt8/dafvprof.htm

Cheers

1 REPLY

Re: interface virtual access/virtual-template

When configuring virtual dialer profiles, the virtual-template interface acts as a general placeholder for parameters you want to asign to dial-in users.

When a user dials into your NAS, a virtual-access interface is "cloned" from the virtual-template interface. The rest of the parameters, access-lists, ip address, routing info, etc, can be asigned from your AAA server for the specific user that dials into the NAS.

Take a look at the following links:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fdial_c/fnsprt8/dafvrtmp.htm

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fdial_c/fnsprt8/dafvprof.htm

Cheers

102
Views
0
Helpful
1
Replies
CreatePlease to create content