Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

IOS 11.3(2) capabilities

I have a cisco 2610 running IOS 11.3 (2) and I want to know what I can do with it. I want to have three servers behind it which I want to be seen by the outside.

I also have a network that I want to be able to browse the Internet through this router.

I have done some research and it seems to me that I should be able to do NAT with this IOS level. Will I be able to do all the things I want to do with this level of software, or will I need to update my IOS? From what I have seen, I think I won't be able to do static NAT route mapping, which I *think* is what I will need to have to allow those three servers to be seen from the outside.

Any ideas on that? All help is appreciated!

1 REPLY
New Member

Re: IOS 11.3(2) capabilities

this link wil show you a table with releases, nat and hardware features:

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_q_and_a_item09186a00800e523b.shtml#Q3

The 11.3T plus IOS supports NAT and PAT.

PAT is what you need to browse the internet.

NAT is what you need to make your three servers available from the internet.

Hope this answers your question.

Pim Sijnja

154
Views
0
Helpful
1
Replies