Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

IOS and NAT

I have a 1751 with two additional ethernet interfaces as well as the built-in 10/100. I want to NAT on these interfaces to different locations (and different NAT). For example, my 10/100 is 192.168.5.x, ethernet 0/1 is 10.33.254.x and ethernet 1/0 is 10.40.254.x. At those times when a workstation is go to the 10.33.254.x network, I want to NAT using 10.33.254.x. When the workstation needs to go to the 10.40.254.x network, I want to NAT using 10.40.254.x. Is this even possible?

2 REPLIES
Bronze

Re: IOS and NAT

New Member

Re: IOS and NAT

Thanks for your help!!!

91
Views
0
Helpful
2
Replies
CreatePlease to create content