ios image version for 1601R

[admin_2]

hi ,,,

can anyone tell me which ios image and version will work with my router 160R . and if it is possible to send it to me because i cannot download it from cisco as i am a guest only .

with :

cisco 1601 (68360) processor (revision C) with 7680K/512K bytes of memory.

Processor board ID 18428393, with hardware revision 00000002

-------8MB RAM and 12MB FLASH

many thanks

[thisisshanky]

You cannot run any of the 12.2 series software, as they require, min 10mb of ram for the 1601Rs

12.0(19a) is one of them, which i found which conforms with the amount of ram you have. its requirement is 8 mb ram and 4mb flash. This IOS is a IP only feature set.

I dont see any other feature set that can be used, because of the amount of RAM you have. You might want to upgrade the ram to a min of 16mb.

[thisisshanky]

Hope this link helps a lot!

http://www.cisco.com/en/US/products/hw/routers/ps214/products_tech_note09186a0080094867.shtml