Thanx for the info. I ended up using some third party TFTP server and everything worked fine. Out of habbit, I deleted the current IOS from flash: before uploading the new one, thinking I had to make room.
Turns out I didn't have to, so that just caused some worry when I first hit "reload." 8)
Everything worked fine though. boot system flash: was the main thing I was looking for. Thanx again
Really depends on which tftp client you have , we still use tftp with no problems even with these humongous 48 meg Sup 720 files they have now . They need to work on this , the code is getting as bloated as microsofts stuff...
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...