Hi.
I'm a newbie in cisco world. I am looking into deploying some tool for ip accounting on our external router border, I have read through and found 'NetFlow' solution which looks to suit our need. My question is, what version of IOS does networl come in into ? I have attached my version from the router.... Any help/suggestions would be much appreciated.
Thanks.
Christian.
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 12.0(7)T, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Tue 07-Dec-99 02:12 by phanguye
Image text-base: 0x80008088, data-base: 0x807AAF70
ROM: System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)
cc-internal uptime is 2 weeks, 6 days, 4 hours, 26 minutes
System returned to ROM by power-on
System image file is "flash:c2600-i-mz.120-7.T"
cisco 2621 (MPC860) processor (revision 0x200) with 26624K/6144K bytes of memory.
Processor board ID JAD051600PW (1446948477)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
2 FastEthernet/IEEE 802.3 interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102