Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

IOS support for netflow (Cisco 2600)

Hi.

I'm a newbie in cisco world. I am looking into deploying some tool for ip accounting on our external router border, I have read through and found 'NetFlow' solution which looks to suit our need. My question is, what version of IOS does networl come in into ? I have attached my version from the router.... Any help/suggestions would be much appreciated.

Thanks.

Christian.

Cisco Internetwork Operating System Software

IOS (tm) C2600 Software (C2600-I-M), Version 12.0(7)T, RELEASE SOFTWARE (fc2)

Copyright (c) 1986-1999 by cisco Systems, Inc.

Compiled Tue 07-Dec-99 02:12 by phanguye

Image text-base: 0x80008088, data-base: 0x807AAF70

ROM: System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)

cc-internal uptime is 2 weeks, 6 days, 4 hours, 26 minutes

System returned to ROM by power-on

System image file is "flash:c2600-i-mz.120-7.T"

cisco 2621 (MPC860) processor (revision 0x200) with 26624K/6144K bytes of memory.

Processor board ID JAD051600PW (1446948477)

M860 processor: part number 0, mask 49

Bridging software.

X.25 software, Version 3.0.0.

2 FastEthernet/IEEE 802.3 interface(s)

32K bytes of non-volatile configuration memory.

8192K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

1 REPLY
Community Member

Re: IOS support for netflow (Cisco 2600)

Your IOS version should be ok.

There is a nice white paper on NetFlow at http://www.cisco.com/univercd/cc/td/doc/cisintwk/intsolns/netflsol/nfwhite.htm with a lot of additional references.

BR. Michael.

931
Views
0
Helpful
1
Replies
CreatePlease to create content