Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

IOS UPDATE

HI

i've this ios:IOS:c3560-ipbase-mz.122-25.SEB4.bin.i need to update to:c3560-ipservicesk9-mz.122-25.SEB4.bin.

what is the full command to update it from the tftp?copy tftp flash....??

10xs

Ali

4 REPLIES

Re: IOS UPDATE

Hi Ali,

AFAIK for 3560 the command is "archive download-sw " to download a new image from a TFTP server to the switch and to overwrite or keep the existing image.

Check this link to get the command detail on 3560

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3560/12225see/cr/cli1.htm#wp2273183

HTH, if yes please rate the post.

Ankur

Community Member

Re: IOS UPDATE

Hi ankur 10xs for ur reply

sir;if i use this command:

copy tftp flash

Address or name of remote host [255.255.255.255]? 10.10.10.10

Source file name?c3560-ipservicesk9-mz.122-25.SEB4.bin

Destination file name? c3560-ipservicesk9-mz.122-25.SEB4.bin

Erase flash device before writing? [confirm] yes/no/yes

this command work or not?

10xs for ur reply

ali

Re: IOS UPDATE

Hi Ali,

I am not very sure about the copy command but looking at the documents (config guide and command reference for 3560) copy command is not present anywhere.I checked one of the very old ios for 3560 which is 12.1(19)EA1, February 2004 and this release also does no sow the copy commands in their documents and stressed on "archieve" command

Have a look at this link for 3560 config guide "Working with IOS file system"

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3560/12119ea1/3560scg/swiosfs.htm#1020620

But being an IOS based switch this command should be present there but not sure if that command will work or not but no harm in trying copy command, you can try that command if it is available in IOS.

HTH, if yes please rate the post.

Ankur

Community Member

Re: IOS UPDATE

HI Ankur!

10xs for ur reply;i'll checked the great link that u have gave it to me.

10xs & have a nice week end

Ali

153
Views
8
Helpful
4
Replies
CreatePlease to create content