Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

IOS upgrade Issue

Dear Team,

 

i have upgraded ios in cisco 3560 from ( c3560-ipbase-mz.122-25.SEE2) to ( c3560e-universalk9-mz.122-55.SE5 )

but after reloading it is giving error harware not supported below is the error i am getting

 

Error: hardware not supported by firmware.
       Try loading newer software instead.
       System Resetting...
Base ethernet MAC Address: 00:19:55:d0:ae:00
Xmodem file system is available.
The password-recovery mechanism is enabled.
Initializing Flash...
flashfs[0]: 403 files, 6 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 32514048
flashfs[0]: Bytes used: 22738944
flashfs[0]: Bytes available: 9775104
flashfs[0]: flashfs fsck took 14 seconds.

 

 

after that i have pressed mode button 

 

 

switch: flash_init
Initializing Flash...
flashfs[0]: 403 files, 6 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 32514048
flashfs[0]: Bytes used: 22738944
flashfs[0]: Bytes available: 9775104
flashfs[0]: flashfs fsck took 14 seconds.
...done Initializing Flash.
Boot Sector Filesystem (bs) installed, fsid: 3
Setting console baud rate to 9600...

switch: load_helper

switch: dir flash:
Directory of flash:/

2    -rwx  676       <date>               vlan.dat
3    -rwx  14581903  <date>               c3560e-universalk9-mz.122-55.SE5.bin
4    -rwx  1233      <date>               config.text
5    drwx  192       <date>               c3560-ipbase-mz.122-25.SEE2
409  -rwx  5         <date>               private-config.text

9775104 bytes available (22738944 bytes used)

 

now i want to boot my switch from old ios image 

 

i have done the below steps

switch: boot system flash:/c3560-ipbase-mz.122-25.SEE2.bin
usage: boot [-n|-j] [-p] [-c] [-f] [-i] [-m] [-notnd] [-notni] [-post] [-skip_post] [-reserve_mem <1-15>] [-no_esp_keepalive] [<filename>]

 

 

switch: boot flash:c3560-ipbase-mz.122-25.SEE2.bin
Loading "flash:c3560-ipbase-mz.122-25.SEE2.bin"...flash:c3560-ipbase-mz.122-25.SEE2.bin: no such file or directory

 

 

 

please help to boot my switch from old ios image kindly share the steps also.

 

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

c3560e-universalk9-mz.122-55

c3560e-universalk9-mz.122-55.SE5.bin

Of course it's not supported.  You've loaded the IOS meant for 3560E/X.

 

Recovering Catalyst Fixed Configuration Switches from a Corrupted or Missing Image

2 REPLIES
Hall of Fame Super Gold

c3560e-universalk9-mz.122-55

c3560e-universalk9-mz.122-55.SE5.bin

Of course it's not supported.  You've loaded the IOS meant for 3560E/X.

 

Recovering Catalyst Fixed Configuration Switches from a Corrupted or Missing Image

Silver

haha xD

haha xD

151
Views
0
Helpful
2
Replies
CreatePlease to create content