Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

IOS upgrade on 2801 failure

As usual , I copy tftp : flash: to copy IOS on Cisco2801 but failed.

Connection between Fe0/0 interface and PC is stable, 100Mbps Full link is up.

I am not sure why Connection time out during copy.

Flash free space is enogh for new IOS.

Please let me know resolusion.

yourname#copy tftp: flash:
Address or name of remote host [10.10.10.2]?
Source filename [n]? c2801-spservicesk9-mz.124-24.T3.bin
Destination filename [c2801-spservicesk9-mz.124-24.T3.bin]?
Accessing tftp://10.10.10.2/c2801-spservicesk9-mz.124-24.T3.bin...
Loading c2801-spservicesk9-mz.124-24.T3.bin from 10.10.10.2 (via FastEthernet0/0): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!... [timed out]

%Error reading tftp://10.10.10.2/c2801-spservicesk9-mz.124-24.T3.bin (Connection timed out)

8 REPLIES
Hall of Fame Super Gold

Re: IOS upgrade on 2801 failure

Is this router located remotely or locally?

New Member

Re: IOS upgrade on 2801 failure

locally.

I put on my pc on the Cisco2801.

Connection is very simple like following.

Cisco2801 and PC (windowsXP) are connecting  via Ethernet cable.

10.10.10.1 (2801 Fe0/0) ---------10.10.10.2 (PC )

I turn off XP firewall, and I can ping between 10.10.10.1 and 10.10.10.2. Link is up with 100Mbps.

please let me know why time out.

Hall of Fame Super Gold

Re: IOS upgrade on 2801 failure

Are you using TFTP32?

New Member

Re: IOS upgrade on 2801 failure

I am using TFTPD for windowsNT/2000/XP2003 version1.01.

It is similar TFTPD32 program.

Hall of Fame Super Gold

Re: IOS upgrade on 2801 failure

Please use TFTP32.

New Member

Re: IOS upgrade on 2801 failure

Change another TFTP software and try again.

New Member

Re: IOS upgrade on 2801 failure

I used tftpd32 and it worked well. it completed upload.

So far  I had used TFTPD for windowsNT/2000/XP2003 version1.01.and no problem.

I am not sure this is compatibility problem between ios and tftpd softwear problem.

Hall of Fame Super Gold

Re: IOS upgrade on 2801 failure

TFTPD32 is recommended by Cisco because it has a good reputation of handling large files.

If your issue has been resolved, please don't forget to mark this thread as "Answered".  Thanks.

467
Views
0
Helpful
8
Replies
CreatePlease login to create content