Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Ios upgrade problem on 7204 router

We are having problems trying to go from c7200-is-mz.120-2a to c7200-ik9s-mz.122.7a.. We are adding the following boot statement to the config:

boot system flash disk0:c7200-ik9s-mz.122-7a.

We set our config reg to 0x2002 as the router is remote and we wanted to be able to use the break key if neccessary.

When we reload we keep coming in boot mode off an IOS that appears to be in bootflash ??

Here is the console message we get:

WSR13#reload

System configuration has been modified. Save? [yes/no]: yes

Building configuration...

Proceed with reload? [confirm]

*Apr 27 14:23:35: %SYS-5-RELOAD: Reload requested

*Apr 27 14:23:36: %BGP-5-ADJCHANGE: neighbor 137.39.4.21 Down - Peer closed the

session

*Apr 27 14:23:36: %BGP-5-ADJCHANGE: neighbor 152.159.128.1 Down - Peer closed th

e session

System Bootstrap, Version 11.1(13)CA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

Copyright (c) 1997 by cisco Systems, Inc.

C7200 processor with 131072 Kbytes of main memory

Self decompressing the image : #################################################

################################################################################

######################################################## [OK]

%SYS-4-CONFIG_NEWER: Configurations from version 12.0 may not be correctly under

stood.

%FR-5-DLCICHANGE: Interface Hssi2/0 - DLCI 500 state changed to ACTIVEboot of "c

isco2-C7200" using boot helper "bootflash:c7200-boot-mz.111-22.CC" failed

error returned: File boot failed -- File not accessible

loadprog: error - on file open

boot: cannot load "cisco2-C7200"

System Bootstrap, Version 11.1(13)CA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

Copyright (c) 1997 by cisco Systems, Inc.

C7200 processor with 131072 Kbytes of main memory

device does not contain a valid magic number

boot: cannot open "slot0:"

boot: cannot determine first file name on device "slot0:"

System Bootstrap, Version 11.1(13)CA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

Copyright (c) 1997 by cisco Systems, Inc.

C7200 processor with 131072 Kbytes of main memory

Self decompressing the image : #################################################

################################################################################

######################################################## [OK]

Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

(c) of the Commercial Computer Software - Restricted

Rights clause at FAR sec. 52.227-19 and subparagraph

(c) (1) (ii) of the Rights in Technical Data and Computer

Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.

170 West Tasman Drive

San Jose, California 95134-1706

Cisco Internetwork Operating System Software

IOS (tm) 7200 Software (C7200-BOOT-M), Version 11.1(22)CC, EARLY DEPLOYMENT RELE

ASE SOFTWARE (fc1)

V111_22_CC_THROTTLE_BRANCH Synced to mainline version: 11.1(22)CA

Copyright (c) 1986-1998 by cisco Systems, Inc.

Compiled Mon 02-Nov-98 21:24 by jjgreen

Image text-base: 0x600088E0, data-base: 0x6036A000

cisco 7204 (NPE200) processor with 122880K/8192K bytes of memory.

R5000 processor, Implementation 35, Revision 2.1 (512KB Level 2 Cache)

Last reset from power-on

X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.

2 FastEthernet/IEEE 802.3 interfaces.

1 HSSI network interface.

125K bytes of non-volatile configuration memory.

4096K bytes of packet SRAM memory.

0K bytes of Flash PCMCIA card at slot 0 (Sector size 0K).

16384K bytes of Flash PCMCIA card at slot 1 (Sector size 128K).

4096K bytes of Flash internal SIMM (Sector size 256K).

Press RETURN to get started!

%SYS-4-CONFIG_NEWER: Configurations from version 12.0 may not be correctly under

stood.

*Apr 27 14:27:43: %FR-5-DLCICHANGE: Interface Hssi2/0 - DLCI 500 state changed t

o ACTIVE

*Apr 27 14:27:43: %SYS-5-CONFIG_I: Configured from memory by console

*Apr 27 14:27:43: %SYS-5-RESTART: System restarted --

Cisco Internetwork Operating System Software

IOS (tm) 7200 Software (C7200-BOOT-M), Version 11.1(22)CC, EARLY DEPLOYMENT RELE

ASE SOFTWARE (fc1)

V111_22_CC_THROTTLE_BRANCH Synced to mainline version: 11.1(22)CA

Copyright (c) 1986-1998 by cisco Systems, Inc.

Compiled Mon 02-Nov-98 21:24 by jjgreen

*Apr 27 14:27:44: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/

0, changed state to up

*Apr 27 14:27:44: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/

0, changed state to down

*Apr 27 14:27:44: %LINEPROTO-5-UPDOWN: Line protocol on Interface Hssi2/0, chang

ed state to up

*Apr 27 14:27:44: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback0, cha

nged state to up

*Apr 27 14:27:44: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up

*Apr 27 14:27:44: %LINK-5-CHANGED: Interface FastEthernet1/0, changed state to a

dministratively down

*Apr 27 14:27:44: %LINK-3-UPDOWN: Interface Hssi2/0, changed state to up

WARNING NOTICE

This system is restricted solely to authorized users for legitimate

business purposes only. The actual or attempted unauthorized access,

use or modification of this system is strictly prohibited. Unauthorized

users are subject to Company disciplinary proceedings and/or criminal

and civil penalties under state, federal or other applicable domestic

and foreign laws. The use of this system may be monitored and recorded

for administrative and security reasons. Anyone accessing this system

expressly consents to such monitoring and is advised that, if such

monitoring reveals possible evidence of criminal activity, may provide

the evidence of such activity to law enforcement officials. All users

must comply with Corporate Instructions regarding the protection of

information assets.

User Access Verification

Password:

*Apr 27 14:27:53: %LINEPROTO-5-UPDOWN: Line protocol on Interface Hssi2/0.1, cha

nged state to down

*Apr 27 14:27:53: %FR-5-DLCICHANGE: Interface Hssi2/0 - DLCI 500 state changed t

o INACTIVE

WSR13(boot)>sho ver

Cisco Internetwork Operating System Software

IOS (tm) 7200 Software (C7200-BOOT-M), Version 11.1(22)CC, EARLY DEPLOYMENT RELE

ASE SOFTWARE (fc1)

V111_22_CC_THROTTLE_BRANCH Synced to mainline version: 11.1(22)CA

Copyright (c) 1986-1998 by cisco Systems, Inc.

Compiled Mon 02-Nov-98 21:24 by jjgreen

Image text-base: 0x600088E0, data-base: 0x6036A000

ROM: System Bootstrap, Version 11.1(13)CA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc

1)

ROM: 7200 Software (C7200-BOOT-M), Version 11.1(22)CC, EARLY DEPLOYMENT RELEASE

SOFTWARE (fc1)

WSR13 uptime is 0 minutes

System restarted by reload

1 REPLY
Cisco Employee

Re: Ios upgrade problem on 7204 router

you have a couple of errors :

1/

using boot helper "bootflash:c7200-boot-mz.111-22.CC" failed

error returned: File boot failed -- File not accessible

2/

memorydevice does not contain a valid magic numberboot: cannot open "slot0:"boot: cannot determine first file name on device "slot0:"System

So, try to format your flash and reinstall the software.

Make sure to remove all the boot system command and add the new ones.

692
Views
0
Helpful
1
Replies
CreatePlease login to create content