I am trying to manage my Cisco IP Phone (Cisco 7690s) environment using CWLMS 2.1 Topology Services. The icon it gives the phone is a switch and the description is that it is a 3550-48. Can anyone shed any light on this?
I thought this was the case but if I have a customer that wants to use the LMS solution to manage his IPT environment, does this mean that they will never be able to manage the phones? Is this because the phones do not have a valid OID and if so how does Cisco propose they are monitored for availability?
IP Phones do not run SNMP on them. As for not showing them in the Topology Map is because each CallManage could have severl hundred phoned connected to it thereby cluttering the map altogether. UserTracking will show you all the details about IP Phones. Topology Map will only show the CallManagers and not the connected IP Phones. UT will show this info.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...