I have a network using RIP v1. I have a ip alias for a virtual database that to servers are going to connect too. The servers can see the virtual address but there is no connection back. I want to be able to type "telnet xxx.xxx.xxx.248 255.255.255.0 and have it redirect me to xxx.xxx.xxx.203 255.255.255.0 the servers are on the same subnet as the ip alias/virtual ip but it does not work.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...