12-11-2003 03:11 AM - edited 03-02-2019 12:17 PM
my Setup
Pix (NAT)---------(e0) router 2500 (s0)--Internet
The router 2500 is running ios 11.1. Is 11.1 compatible with Pix.Because i can`t get my internal host to connect the internet(the same was working with cisco 2600,ios 12.3)
12-11-2003 04:08 AM
It shouldn't be an IOS issue. But you changed both hardware (router) and IOS. When doing this you may have lost some functionality. Can you post sh ver and sh run of both old and new configuration.
12-11-2003 04:50 AM
Yeah you are right,it wasn`t ios issue. The restart of pix solved the problem.
Sorry just a quick check
ip nat outside source static 192.168.0.1 172.16.0.1
Can both(inside and outside network) initiate traffic to specified host.Or should I have one seperate for inside.
12-11-2003 05:27 AM
This NAT entry is static, therefore it'll always be in NAT table (you can check with sh ip nat translation). And from both sides traffic can be initiated.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide