Is it possible SMI software to convert to L3 EMI

[network_team]

I would like to know if it is possible to upgrade a SMI 3550 switch to a layer 3 image like a emi

[pkhatri]

Yes, all of the 3550 SMI switches are upgradeable to EMI software.

Hope that helps - pls rate the post if it does.

Paresh

[network_team]

Hi

i have found some software but i'm having difficulties in reading weather i have enough memory.

Switch uptime is 31 minutes

System returned to ROM by power-on

System image file is "flash:c3550-i9q3l2-mz.121-19.EA1c/c3550-i9q3l2-mz.121-19.EA1c.bin"

cisco WS-C3550-24 (PowerPC) processor (revision L0) with 65526K/8192K bytes of memory.

Running Layer2/3 Switching Image

The password-recovery mechanism is enabled.

384K bytes of flash-simulated non-volatile

Do i have enough for c3550-i5q3l2-mz.121-22.EA7.bin 64 memory 16 flash

[pkhatri]

Hi,

The 3550 comes with 64Mb of DRAM and 16Mb of Flash so you do indeed have sufficient memory for ths image.

Hope that helps - pls rate the post if it does.

Paresh

[network_team]

i can understand finding the 64 meg on a show ver but cant find the flash amount

[pkhatri]

Hi,

Issue the command 'show flash:' to verifu how much flash you have.

Hope that helps - pls rate the post if it does.

Paresh

[network_team]

High is it at the bottom 15998976 bytes total

witch#show flash:

Directory of flash:/

2 -rwx 0 Jan 01 1970 00:01:44 env_vars

3 -rwx 344 Jan 01 1970 00:01:44 system_env_vars

4 -rwx 2416Mar 01 1993 00:03:26 vlan.dat

8 drwx 192Mar 01 1993 00:04:16 c3550-i9q3l2-mz.121-19.EA1c

15998976 bytes total (9587712 bytes free)

[pkhatri · Accepted solution]

Yep, that means that it has 16Mb of Flash. Therefore, you should have no problems upgrading to that new IOS image. In all likelihood, you will have to delete the existing c3550-i9q3l2-mz.121-19.EA1c image in order to fit in the new image. That is standard procedure and should not be a problem.

Hope that helps - pls rate the post if it does.

Paresh