Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Is it possible SMI software to convert to L3 EMI

I would like to know if it is possible to upgrade a SMI 3550 switch to a layer 3 image like a emi

1 ACCEPTED SOLUTION

Accepted Solutions
Purple

Re: Is it possible SMI software to convert to L3 EMI

Yep, that means that it has 16Mb of Flash. Therefore, you should have no problems upgrading to that new IOS image. In all likelihood, you will have to delete the existing c3550-i9q3l2-mz.121-19.EA1c image in order to fit in the new image. That is standard procedure and should not be a problem.

Hope that helps - pls rate the post if it does.

Paresh

7 REPLIES
Purple

Re: Is it possible SMI software to convert to L3 EMI

Yes, all of the 3550 SMI switches are upgradeable to EMI software.

Hope that helps - pls rate the post if it does.

Paresh

New Member

Re: Is it possible SMI software to convert to L3 EMI

Hi

i have found some software but i'm having difficulties in reading weather i have enough memory.

Switch uptime is 31 minutes

System returned to ROM by power-on

System image file is "flash:c3550-i9q3l2-mz.121-19.EA1c/c3550-i9q3l2-mz.121-19.EA1c.bin"

cisco WS-C3550-24 (PowerPC) processor (revision L0) with 65526K/8192K bytes of memory.

Running Layer2/3 Switching Image

The password-recovery mechanism is enabled.

384K bytes of flash-simulated non-volatile

Do i have enough for c3550-i5q3l2-mz.121-22.EA7.bin 64 memory 16 flash

Purple

Re: Is it possible SMI software to convert to L3 EMI

Hi,

The 3550 comes with 64Mb of DRAM and 16Mb of Flash so you do indeed have sufficient memory for ths image.

Hope that helps - pls rate the post if it does.

Paresh

New Member

Re: Is it possible SMI software to convert to L3 EMI

i can understand finding the 64 meg on a show ver but cant find the flash amount

Purple

Re: Is it possible SMI software to convert to L3 EMI

Hi,

Issue the command 'show flash:' to verifu how much flash you have.

Hope that helps - pls rate the post if it does.

Paresh

New Member

Re: Is it possible SMI software to convert to L3 EMI

High is it at the bottom 15998976 bytes total

witch#show flash:

Directory of flash:/

2 -rwx 0 Jan 01 1970 00:01:44 env_vars

3 -rwx 344 Jan 01 1970 00:01:44 system_env_vars

4 -rwx 2416Mar 01 1993 00:03:26 vlan.dat

8 drwx 192Mar 01 1993 00:04:16 c3550-i9q3l2-mz.121-19.EA1c

15998976 bytes total (9587712 bytes free)

Purple

Re: Is it possible SMI software to convert to L3 EMI

Yep, that means that it has 16Mb of Flash. Therefore, you should have no problems upgrading to that new IOS image. In all likelihood, you will have to delete the existing c3550-i9q3l2-mz.121-19.EA1c image in order to fit in the new image. That is standard procedure and should not be a problem.

Hope that helps - pls rate the post if it does.

Paresh

721
Views
10
Helpful
7
Replies
CreatePlease login to create content