Is it possible to connect a remote PC (Windows) to a LAN using router's AUX port with an analog modem? We want access to LAN, not telnet to router.
We are testing a remote access connection with a USR modem connected to AUX port of a 7206 router.
We try to connect from a PC (Windows dial-up) with a modem. Connection is established, and we can even gain access to router management (using hyperterminal), but we cannot enter the remote LAN. It seems that ppp negotiation is not started.
[toc:faq]The ProblemOn traditional switches whenever we have a trunk
interface we use the VLAN tag to demultiplex the VLANs. The switch needs
to determine which MAC Address table to look in for a forwarding
decision. To do this we require the switch to do...
[toc:faq]Introduction:Netdr is a tool available on a RSP720, Sup720 or
Sup32 that allows one to capture packets on the RP or SP inband. The
netdr command can be used to capture both Tx and Rx packets in the
software switching path. This is not a substitut...
IntroductionOSPF, being a link-state protocol, allows for every router
in the network to know of every link and OSPF speaker in the entire
network. From this picture each router independently runs the Shortest
Path First (SPF) algorithm to determine the b...