Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Is it possible to LACP between Cisco 7513Router & Riverstone RS3000

7513=== riverstone switch

dual fast ethernet line connecting....

7513 router support LACP?

if 7513 router support LACP, Please speak sample-config url to me..

7513-Router#sh ver

Cisco Internetwork Operating System Software

IOS (tm) RSP Software (RSP-PV-M), Version 12.1(11b)E1, EARLY DEPLOYMENT RELEASE

SOFTWARE (fc1)

TAC Support: http://www.cisco.com/tac

Copyright (c) 1986-2002 by cisco Systems, Inc.

Compiled Thu 21-Mar-02 15:51 by eaarmas

Image text-base: 0x60010958, data-base: 0x6116E000

ROM: System Bootstrap, Version 11.1(2) [nitin 2], RELEASE SOFTWARE (fc1)

BOOTLDR: RSP Software (RSP-BOOT-M), Version 12.1(11b)E1, EARLY DEPLOYMENT RELEAS

E SOFTWARE (fc1)

icu-router uptime is 4 weeks, 4 days, 10 hours, 14 minutes

System returned to ROM by reload at 05:20:04 UTC Fri Apr 26 2002

System image file is "slot0:rsp-pv-mz.121-11b.E1.bin"

cisco RSP2 (R4700) processor with 131072K/2072K bytes of memory.

R4700 CPU at 100Mhz, Implementation 33, Rev 1.0

Last reset from power-on

G.703/E1 software, Version 1.0.

G.703/JT2 software, Version 1.0.

X.25 software, Version 3.0.0.

Chassis Interface.

1 FSIP controller (4 Serial).

1 GEIP controller (1 GigabitEthernet).

1 FEIP2 controller (2 FastEthernet).

1 VIP4-80 RM7000 controller (2 Serial).

2 FastEthernet/IEEE 802.3 interface(s)

1 Gigabit Ethernet/IEEE 802.3 interface(s)

6 Serial network interface(s)

123K bytes of non-volatile configuration memory.

16384K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).

20480K bytes of Flash PCMCIA card at slot 1 (Sector size 128K).

8192K bytes of Flash internal SIMM (Sector size 256K).

No slave installed in slot 7.

Configuration register is 0x2102

7513-Router#

thank you

1 REPLY
Cisco Employee

Re: Is it possible to LACP between Cisco 7513Router & Riverstone

You should be able to configure etherchannel on your 7513 router. Try this and let me know

http://www.cisco.com/warp/public/473/158.html#config2

LACP and PAGP are done at layer 2 and the router should not differenciate these protocols

150
Views
0
Helpful
1
Replies