Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Is portfast enabled on a 15/1 port on 6006 MSFC normal?

When I do a show spantree on a 6006 with MSFC module, I see port 15/1 with portfast enabled. Is that normal?

2 REPLIES
Anonymous
N/A

Re: Is portfast enabled on a 15/1 port on 6006 MSFC normal?

Yes this is normal.

The default value for portfast is "disabled" for all ports. Nevertheless, module 15 is the MSFC port which uses an internal connection to the switch bus and then, reasonably I think, the portfast is "enabled".

New Member

Re: Is portfast enabled on a 15/1 port on 6006 MSFC normal?

yes, you are probably running into

CSCdv19071 - portSpantreeFastStart incorrect for internal MSFC trunk ports (see CSCdu84069)

"portfast status (portSpantreeFastStart) is being reported incorrectly via SNMP

for internal MSFC trunk ports.

This causes false alarms for network management products monitoring portfast

state (such as Ciscoworks 2000 Campus Manager). See CSCdu84069)."

110
Views
0
Helpful
2
Replies
CreatePlease to create content