Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Is this mean, the ATM card has not been trained?

I tried to find the following info, but no luck.

Is that mean the ADSL line has no dial tone?

ro1-10000#sh dsl int atm 0/0/0

ATM0/0/0

Alcatel 20190 chipset information

Line has not yet been activated.

Modem Status: Down (DMTDSL_DO_OPEN)

DSL Mode: Unknown

Interrupts: 4037485 (0 spurious)

PHY Access Err: 0

Activations: 0

LED Status: OFF

LED On Time: 0

LED Off Time: 0

Init FW: init_AMR-R-2.5.042_no_bist.bin

Operation FW: AMR-R-2.5.042.bin

FW Source: embedded

DSL: Training log buffer capability is not enabled

1 REPLY
Hall of Fame Super Gold

Re: Is this mean, the ATM card has not been trained?

Yes, it cannot activate DSL line. The line may or may not have dialtone for a telephone, that is unrelated to DSL working.

If the line is known to work with another modem/router, try upgrading ADSL firmware going to:

ftp://ftp.cisco.com/access/800

download Fw 3.0.x and the related installation instructions.

Hope this helps, please rate post if it does!

427
Views
5
Helpful
1
Replies
CreatePlease to create content