Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Is X25 Failover also an IP NAT failover feature / I need IP NAT failover

X25 Failover seems to be a Cisco Interface failover feature. But does it provide NAT IP address failover??? What is the IP address failover feature?? Eg. X25 Failover can failover from Ethernet 0 to Ethernet 1. But what I need is IP NAT failover. Eg. Currently I have a public static ip of 203.155.155.155 NAT to 192.168.100.5 computer on the internal network. If the 192.168.100.5 computer shutdown. I need IP NAT failover to redirect 203.155.155.155 NAT to 192.168.100.7 computer immediately. What's this feature and how to program it???? Thanks

1 REPLY
New Member

Re: Is X25 Failover also an IP NAT failover feature / I need IP

I think what you're looking for would be a solution using HSRP.

Check this out and see if it's what you're looking for:

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094a91.shtml

Hope this helps!

81
Views
0
Helpful
1
Replies
CreatePlease to create content