All the documentation on this subject talks about Cisco talking to Cisco but what if you have a situation where you have 3Com routers on the other end. Is there any documentation on this subject. My problem is that we are migrating all routing and switching to Cisco kit in the long term but we are still having to use 3Com Netbuilder II routers at HQ for at least another year. I f anyone has experience of this environment could you point me in the right direction.
I infer that you are wondering if just the ISDN backup portion will work? In short, yes. I have used Cisco DDR communicating with other vendors. Just use simple, standard protocols (PPP on serial, floating static routes, etc).
As for the FR part, just remember that the default is Cisco encapuslation. It should be changed to IETF for multi-vendor environment.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...