Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ISDN Backup Issues

Does anyone know why ISDN does not hangup when the primary line frame comes backup.

We are using floating routes, dialer idle and dialer groups?

1 REPLY
Cisco Employee

Re: ISDN Backup Issues

ISDN line should be disconnected after idle-timeout expired once the Primary line becoms active. That is true if no interesting data going over the ISDN line.

So you can debug that by checking that idle-timeout is expired or not OR it is keep on resetting back to max..

Here is the url for that

http://www.cisco.com/warp/public/471/idle_timeout.html

Once the primary line becomes active, the idle-timeout on the isdn interface will count down towards 0. "sh dialer interface " will show that.

Once it becoms 0, "debug dialer" will report line disconnected because of idle-timeout expired..

86
Views
0
Helpful
1
Replies
CreatePlease login to create content