Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ISDN Backup using Chap and TACAS

I have multiple sites comming into a central location with an ISDN bri as backup for fail over for voice and data. I need a config for implementing with TACAS. Thanks

  • Other Network Infrastructure Subjects
New Member

Re: ISDN Backup using Chap and TACAS

You can configure the dialer interface and make your dialer interface as the backup interface.

In this way all the interface vcan use the same physical port for dial backup and for chap configure for authentication as

ppp authentication chap

and for frpm tacacs, you have to configure on line as

login tacacs

New Member

Re: ISDN Backup using Chap and TACAS

I guess what ever the user name and password of the tacas is what I put on the remote router to auth. It has to be the same on my core router also right


This widget could not be displayed.