Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ISDN Bonding

i need to bond two ISDN lines on two WIC ISDN cards (1750) dialing to a remote site( 2610 with 4 port ISDN NM) can you give me a sample config for this kind of a setup....

Thanks

1 REPLY
VIP Purple

Re: ISDN Bonding

I suggest you go to www.cisco.com and search for ConfigMaker. It is a free download, and can help greatly with these tasks.

The below approach causes one circuit to kick in, and then a second should the amount of traffic require it (probably saving you some call charges).

The important bits for your config are:

interface Dialer 1

ppp multilink

dialer load-threshold 10

dialer-group 1

interface BRI 0

dialer rotary-group 1

117
Views
0
Helpful
1
Replies
CreatePlease login to create content