Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ISDN BRI Interface

Hi,

Is it possible to use same BRI interface to establish connection to two locations at the same time? One connection will be dial out and other will be dial in from another location?

thanks and regards,

Silju

2 REPLIES
New Member

Re: ISDN BRI Interface

Yes it is, using dialer interfaces, and dialer pools/pool members. The physical links are pool members, and the pools are stated in the logical dialer interfaces. There are sample configs for using dialer profiles in the Technical Tips section of Cisco.com at http://www.cisco.com/warp/public/793/access_dial/ddr_dialer_profile.html

New Member

Re: ISDN BRI Interface

Yes it is possible. If you need point to point type interfaces for routing or other purposes use dialer profiles. If a multipoint interface is ok then use legacy type ddr. Search for "access cookbook" on www.cisco.com and you can get some sample configs.

Josh

107
Views
0
Helpful
2
Replies
CreatePlease login to create content