08-06-2003 12:29 PM - edited 03-04-2019 02:52 AM
Hello all, I'm tring to initiate an ISDN call from a Cisco 7513 to a remote 2611 router. I'm getting this error:
Aug 6 15:27:06.690 CDT: ISDN BR1/0: Incoming call id = 0x0057, dsl 8
Aug 6 15:27:06.690 CDT: ISDN BR1/0: received HOST_INCOMING_CALL call_id 0x57
Aug 6 15:27:06.690 CDT: ISDN BR1/0: HOST_INCOMING_CALL: (non-POTS) DATA
Aug 6 15:27:06.694 CDT: ISDN BR1/0: HOST_INCOMING_CALL: (1) call_type = DATA
Aug 6 15:27:06.694 CDT: ISDN BR1/0: HOST_INCOMING_CALL: voice_answer_data = FAL
SE call type is DATA
Aug 6 15:27:06.694 CDT: ISDN BR1/0: RM returned call_type 0 resource type 0 res
ponse 1
Aug 6 15:27:06.698 CDT: ISDN BR1/0: isdn_send_connect(): msg 4, call id 0x57, c
es 1 bchan 0, call type DATA
Aug 6 15:27:06.698 CDT: %LINK-3-UPDOWN: Interface BRI1/0:1, changed state to up
Aug 6 15:27:06.870 CDT: ISDN BR1/0: received HOST_CONNECT call_id 0x57
Aug 6 15:27:06.870 CDT: ISDN BR1/0: Event: Connected to 3124254847 on B1 at 64
Kb/s
Aug 6 15:27:07.920 CDT: ISDN BR1/0: Event: Hangup call to call id 0x57 ces = 1
Aug 6 15:27:07.924 CDT: ISDN BR1/0: process_disconnect(): call id 0x57, call ty
pe is DATA, b_idb 0x80CF28E8, ces 1, cause Normal call clearing(0x10)
Aug 6 15:27:07.928 CDT: %ISDN-6-DISCONNECT: Interface BRI1/0:1 disconnected fr
om 3124254847 cr-core-lit1, call lasted 1 seconds
Aug 6 15:27:08.052 CDT: ISDN BR1/0: received HOST_DISCONNECT_ACK call_id 0x57
Aug 6 15:27:08.056 CDT: ISDN BR1/0: HOST_DISCONNECT_ACK: call type is DATA
Aug 6 15:27:08.056 CDT: %LINK-3-UPDOWN: Interface BRI1/0:1, changed state to do
wn
this is the debug isdn events output on the remote router receiving the call.
any help would be greatly appreciated.
respectfully
jm
08-06-2003 06:10 PM
Better debugs to run would be "deb isdn q931" "deb ppp nego" on both the ends.
Thanks, Mak.
08-07-2003 10:06 AM
can you paste in the config from both sides
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide