Using a 2600 with 8 port BRI so individual users can dial in from various locations. We want the link to timeout after an idle or 1800 seconds. At a few sites, we have some links that do not drop, but others on the same router that do. Looking at show isdn history, the lines that will not drop have the comment 'unavail' under the column seconds left. All BRIs and dialers are configured the same way.
Steve: I noticed the same situation on a couple of 1760 routers on an ISDN BRI point-to-point link that I just configured. If I recall correctly, when I enabled "ppp multilink" the "Unavail" would appear under the "Seconds Left" column when I performed a "sh isdn active" command.
If I have time--and the courage to disable ppp multilink on an active link--I will double-check if that is what was occurring.
I too was curious about the Unavail entry, but never had the time to look into it.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.