isdn connection with access-list set by cisco secure

[admin_2]

I have a problem with remote connection. The access-list set in cisco-secure is used with a pstn connection but not with a isdn connection. I have this message PERUSER-3-ISDNINTF: Se1/0:18 access_group: Can not apply configuration to ISDN channel: test.

I do this test with the same PC, the same username and the same router.

[#2]

If you are not using MPPP on the ISDN

link, then you need to have virtual-

profiles configured. We cannot apply

interface specific commands to an

ISDN connection without a virtual-

access interface, which means that

VP or MPPP is required.