05-27-2002 07:59 PM - edited 03-01-2019 09:53 PM
Hi anyone has any idea that can I use my router 1600 to connect to Internet as what other ISDN routers do, i.e. connect to Internet as required by internal Internet traffic and once connected, it will automatically gain an IP address from the ISP (like normal analog modem ISP dial-up) ?
If 1600 is able to do this, so please guide anywhere I can have a sample configuration for such requirement. Response is much appreciated.
05-28-2002 02:46 AM
Hi,
The first link is specific and the second is the access dial cookbook
http://www.cisco.com/warp/public/779/smbiz/service/configs/isdn/isdn_isp_chap_nat.htm
http://www.cisco.com/warp/public/793/access_dial/backofbookindex.html
Note that the first link uses legacy DDR whereas for scalability I would prefer to use Dialer Profile, example here:
http://www.cisco.com/warp/public/793/access_dial/ddr_dialer_profile.html
HTH
Ali
05-29-2002 10:51 PM
Ali thanks a lot on your guide on the useful URL given. T.Q.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: