Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ISDN dial in and out

Hi,

Is it possible to have simultanious dial in and dial out connection on the same ISDN BRI? I suppose there are some limitations with the signaling but would like to verify with the forum

Thks

Velimir

3 REPLIES
Cisco Employee

Re: ISDN dial in and out

BRI line has 2 B-channels and a D channel..so you can use one for dialin and another for dialout simultaneously...D channel is the one which will handle signalling part..

New Member

Re: ISDN dial in and out

Thanks for your resopnse.

I searched all over Cisco's site and could not find any sample config on this problem. Do you have any suggestions?

Regards

Velimir

New Member

Re: ISDN dial in and out

Hi Velimir

You can use dialer profile to configure this. You create two profiles one for dial out and one for dila-in.You may find many configurations of dialer profile on cisco website.

You can find more details on this link. This logical profile will carry out your in and out functionality.

http://www.cisco.com/warp/public/793/access_dial/ddr_dialer_profile.html

Dilip

94
Views
4
Helpful
3
Replies