Is there anything unique about having an ISDN router dial a digital RAS modem card? We set up the bris and dialers just like we set them for our sites that dial isdn to isdn. It seems that it comes up for 20 secs and then dies. If we are just calling one way, do we need to set up the dialer and authentication password at the other end?
The purpose of the modems is to allow the ras to receive voice calls on isdn circuits. The isdn coming into the ras needs to be provisioned for voice and data and you need to tell the ras to send incoming voice calls to the modems with this statement in the pri or bri int " isdn incoming-voice modem". If the line is not provisioned right or that statement is not present it will still connect but will fail when it sees it is a voice call. If you are calling isdn to isdn the modems are not used.
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...