I have a Call Manager configuration that has a VG200 with a T1 PRI as its gateway. I am having some problems with the Telco in that they are expecting 10 digits but they say we are only sending 7 digits. In doing isdn debug q931, the output indicates we are sending 10 digits.
In researching this, TAC recommended doing somthing with the isdn map address command. My question is how do the different parameters for type and plan affect the output on the d-channel? I have found nothing to indicate what they do.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...