Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ISDN on multiple sites

I need a main site to call 2 remote sites but the 2 remote sites do not need to call the main site. It is a one way commnuication. Connection will always only be initiated from the main site.

Do I still need to configure phone numbers on the remote sites.

Do I need to create BRI interface and dialer profiles on the remote sites?

Thanks

1 REPLY
VIP Purple

Re: ISDN on multiple sites

Hello,

you do not need to configure phone numbers on the remote sites, but you do need either physical BRI configuration or BRI with dialer interfaces on the remote site, in order to configure encapsulation, authentication, IP address of the remote site, and anything else that the central site requires (e.g. multilink, or compression).

HTH,

GP

86
Views
0
Helpful
1
Replies