Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

ISDN PRI: TEI_ASSIGNED status in layer 2

My working PRI line says TEI_ASSIGNED at Layer 2 upon issueing the SHOW ISDN STATUS and doesn't take incoming calls from remote router

2 REPLIES
Silver

Re: ISDN PRI: TEI_ASSIGNED status in layer 2

You can't take calls because Layer 2 isn't in right state. It should display MULTIPLE_FRAME_ESTABLISHED at Layer 2.

For more information refer to 'E1 PRI Troubleshooting':

http://www.cisco.com/en/US/tech/tk713/tk584/technologies_tech_note09186a00800f9e3a.shtml

'E1 PRI Troubleshooting Flowchart':

http://www.cisco.com/en/US/tech/tk713/tk584/technologies_tech_note09186a00800a70fc.shtml

and 'E1 Troubleshooting':

http://www.cisco.com/en/US/tech/tk713/tk584/technologies_tech_note09186a00800a70fb.shtml

These pages offer very useful flowcharts for troubleshooting PRI lines.

HTH

P.S: I'm also managing PRI lines, and recently installed a new one. When I checked it, I also saw Layer 2 TEI_ASSIGNED. Problem came from Telco provider. They solved it later.

Silver

Re: ISDN PRI: TEI_ASSIGNED status in layer 2

In the US it should be multi frames established. If you are not in this state it is a carrier problem . Outside the US this is the normal state prior to placing a call.

853
Views
0
Helpful
2
Replies
CreatePlease to create content