cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
543
Views
0
Helpful
6
Replies

ISDN Problems

Roman Pfeifer
Level 1
Level 1

I am testing my ISDN line and I seem to be getting the following errors when I do a -debug isdn events- :

00:10:20: ISDN BR0: Physical layer is IF_DOWN

00:10:20: ISDN BR0: Recvd MPH_DEACT_IND from L1

00:10:20: ISDN BR0: L1 is IF_ACTIVE

00:11:12: ISDN BR0: Physical layer is IF_DOWN

00:11:12: ISDN BR0: Recvd MPH_DEACT_IND from L1

00:11:12: ISDN BR0: L1 is IF_ACTIVE

00:12:05: ISDN BR0: Physical layer is IF_DOWN

00:12:05: ISDN BR0: Recvd MPH_DEACT_IND from L1

00:12:05: ISDN BR0: L1 is IF_ACTIVE

00:12:57: ISDN BR0: Physical layer is IF_DOWN

00:12:57: ISDN BR0: Recvd MPH_DEACT_IND from L1

00:12:57: ISDN BR0: L1 is IF_ACTIVE

00:13:49: ISDN BR0: Physical layer is IF_DOWN

00:13:49: ISDN BR0: Recvd MPH_DEACT_IND from L1

00:13:49: ISDN BR0: L1 is IF_ACTIVE

00:14:41: ISDN BR0: Physical layer is IF_DOWN

00:14:41: ISDN BR0: Recvd MPH_DEACT_IND from L1

00:14:41: ISDN BR0: L1 is IF_ACTIVE

00:15:33: ISDN BR0: Physical layer is IF_DOWN

00:15:33: ISDN BR0: Recvd MPH_DEACT_IND from L1

00:15:33: ISDN BR0: L1 is IF_ACTIVE

00:16:25: ISDN BR0: Physical layer is IF_DOWN

00:16:25: ISDN BR0: Recvd MPH_DEACT_IND from L1

00:16:25: ISDN BR0: L1 is IF_ACTIVE

00:36:21: ISDN BR0: Physical layer is IF_DOWN

00:36:21: ISDN BR0: Recvd MPH_DEACT_IND from L1

00:36:21: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down

00:36:30: ISDN BR0: L1 persistent Deactivated

00:37:13: ISDN BR0: L1 is IF_ACTIVE

00:37:14: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up

Any ideas what the problem could be.

6 Replies 6

lgijssel
Level 9
Level 9

Could be an incorrect ISDN switch-type setting.

That´s the Config:

version 12.1

service timestamps debug uptime

service timestamps log uptime

service password-encryption

!

hostname Router

!

enable password xxxxxx

!

!

!

!

!

!

ip subnet-zero

ip dhcp excluded-address 192.168.129.1

ip dhcp excluded-address 192.168.129.100

ip dhcp excluded-address 192.168.129.200

!

ip dhcp pool dhcp1

network 192.168.129.0 255.255.255.0

default-router 192.168.129.1

!

no ip domain-lookup

isdn switch-type basic-net3

isdn leased-line BRI0

!

!

!

interface Ethernet0

ip address 192.168.129.1 255.255.255.0

no shutdown

!

interface BRI0

no ip address

encapsulation ppp

no shutdown

!

interface BRI0:1

ip address 192.168.128.2 255.255.255.252

encapsulation ppp

no shutdown

!

interface BRI0:2

no ip address

shutdown

!

router eigrp 1

network 192.168.128.0

network 192.168.129.0

!

no ip http server

ip classless

ip route 0.0.0.0 0.0.0.0 192.168.128.1

!

!

line con 0

password xxxxxx

login

transport input none

stopbits 1

line vty 0 4

password xxxxxx

login

!

no rcapi server

!

!

end

What does your sh int bri0 show ?

BRI0 is up, line protocol is up

Hardware is BRI with S/T interface and POTS

MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec,

reliability 255/255, txload 1/255, rxload 1/255

Encapsulation PPP, loopback not set

Keepalive set (10 sec)

LCP Open

Open: CDPCP

Last input 00:00:04, output 00:00:04, output hang never

Last clearing of "show interface" counters 2d18h

Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0

Queueing strategy: weighted fair

Output queue: 0/1000/64/0 (size/max total/threshold/drops)

Conversations 0/1/16 (active/max active/max total)

Reserved Conversations 0/0 (allocated/max allocated)

5 minute input rate 0 bits/sec, 0 packets/sec

5 minute output rate 0 bits/sec, 0 packets/sec

52355 packets input, 1882450 bytes, 0 no buffer

Received 0 broadcasts, 0 runts, 0 giants, 0 throttles

0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort

52354 packets output, 1882436 bytes, 0 underruns

0 output errors, 0 collisions, 39 interface resets

0 output buffer failures, 0 output buffers swapped out

89 carrier transitions

BRI0:1 is up, line protocol is up

Hardware is BRI with S/T interface and POTS

Internet address is 192.168.128.1/30

MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec,

reliability 255/255, txload 3/255, rxload 3/255

Encapsulation PPP, loopback not set

Keepalive set (10 sec)

LCP Open

Open: CDPCP, IPCP

Last input 00:00:00, output 00:00:00, output hang never

Last clearing of "show interface" counters 2d18h

Input queue: 1/75/0/0 (size/max/drops/flushes); Total output drops: 0

Queueing strategy: weighted fair

Output queue: 0/1000/64/0 (size/max total/threshold/drops)

Conversations 0/2/16 (active/max active/max total)

Reserved Conversations 0/0 (allocated/max allocated)

5 minute input rate 1000 bits/sec, 2 packets/sec

5 minute output rate 1000 bits/sec, 1 packets/sec

2403 packets input, 140477 bytes, 0 no buffer

Received 0 broadcasts, 0 runts, 0 giants, 0 throttles

49136 input errors, 10566 CRC, 19071 frame, 0 overrun, 0 ignored, 19499 abort

52123 packets output, 1001571 bytes, 0 underruns

0 output errors, 0 collisions, 0 interface resets

0 output buffer failures, 0 output buffers swapped out

89 carrier transitions

BRI0:2 is administratively down, line protocol is down

Hardware is BRI with S/T interface and POTS

MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec,

reliability 255/255, txload 1/255, rxload 1/255

Encapsulation HDLC, loopback not set

Keepalive set (10 sec)

Last input never, output 2d18h, output hang never

Last clearing of "show interface" counters never

Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0

Queueing strategy: weighted fair

Output queue: 0/1000/64/0 (size/max total/threshold/drops)

Conversations 0/1/16 (active/max active/max total)

Reserved Conversations 0/0 (allocated/max allocated)

5 minute input rate 0 bits/sec, 0 packets/sec

5 minute output rate 0 bits/sec, 0 packets/sec

0 packets input, 0 bytes, 0 no buffer

Received 0 broadcasts, 0 runts, 0 giants, 0 throttles

0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort

1 packets output, 24 bytes, 0 underruns

0 output errors, 0 collisions, 0 interface resets

0 output buffer failures, 0 output buffers swapped out

89 carrier transitions

Ethernet0 is up, line protocol is up

Hardware is PQUICC Ethernet, address is 00b0.c28b.58a7 (bia 00b0.c28b.58a7)

Internet address is 209.28.98.223/24

MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec,

reliability 255/255, txload 1/255, rxload 1/255

Encapsulation ARPA, loopback not set

Keepalive set (10 sec)

ARP type: ARPA, ARP Timeout 04:00:00

Last input 00:00:00, output 00:00:03, output hang never

Last clearing of "show interface" counters never

Queueing strategy: fifo

Output queue 0/40, 0 drops; input queue 0/75, 0 drops

5 minute input rate 2000 bits/sec, 4 packets/sec

5 minute output rate 0 bits/sec, 0 packets/sec

489026 packets input, 47033755 bytes, 0 no buffer

Received 488259 broadcasts, 0 runts, 0 giants, 0 throttles

2 input errors, 0 CRC, 0 frame, 0 overrun, 2 ignored

0 input packets with dribble condition detected

84910 packets output, 7805377 bytes, 0 underruns

0 output errors, 3 collisions, 2 interface resets

0 babbles, 0 late collision, 12 deferred

0 lost carrier, 0 no carrier

0 output buffer failures, 0 output buffers swapped out

It looks like you are passing traffic over this interface from the sh int above

Should the interface BRI0 be shut down?

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: