Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

isdn routes

when routing to isdn, do we really need to put 2 routes in, I have seen this

192.168.1.0 255.255.255.0 192.168.2.1

192.168.2.1 255.255.255.255 dialler 0

cant we just point 1 route out straight to the dialler ?

  • Other Network Infrastructure Subjects
1 REPLY
Bronze

Re: isdn routes

Hi Carl,

Yes, you can put one route only as follows:

first option - to the interface, and it will be like directly connected

Second option - for example...

if you have a dialer interface with IP 192.168.1.1 and 192.168.1.2 for the second part of this link, you can do

ip route 192.168.2.0 255.255.255.0 192.168.1.2

But be careful,

what u mentioned above is strange.

if you need to define a static route for 192.168.1.0/24,

do the following directly:

ip route 192.168.1.0 255.255.255.0 dialer 0 ( if this route can be reached through the dialer interface).

I hope this is helpful.

plz. rate if it does!

Thanks

Abd Alqader

92
Views
0
Helpful
1
Replies
This widget could not be displayed.