I have set up a few ISDN by using BRI to BRI, BRI to PRI, and Adtran ISU128 to ISU128 and serial port. Has any body ever successfully set up an ISDN by using BRI to Adtran ISU128 ? If you can let me know why it will not work, I would be much appreciated.
If the ISU128 is doing the dialing, make sure you have no dialer map or dialer in-band type things in your config, as all that is taken care of but you will see serious flapping if you try to push it from both sides.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.