Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ISDN

I have configured my bri 0 interface to dial out on anything, why cant I ping the other end, The light doesnt come on , on the front of mt 1700 router ? the router the other end does not have a password, should this still work ?

7 REPLIES

Re: ISDN

Lets look at your configs. Also paste a sh isdn status as well at either ends.

New Member

Re: ISDN

interface BRI0

ip unnumbered FastEthernet0

no ip route-cache

dialer map ip 10.40.24.4 name ndu-welcome xxxxxxxxxxx

dialer-group 1

isdn switch-type basic-net3

no fair-queue

dialer-list 1 protocol ip permit

ip route 10.40.24.0 255.255.255.0 10.40.24.4

Re: ISDN

You did not paste output of sh isdn status -> this is to verify that your isdn interface is working properly.

You dont need the password as long as you dont use authentication.

You can additionally use PPP encapsulation, "encapsulation ppp" under the bri interface. (both ends).

If possible, paste output of debug dialer to see whats happening.

New Member

Re: ISDN

here it is !!

WELCOME#sh isdn status

Global ISDN Switchtype = basic-net3

ISDN BRI0 interface

dsl 0, interface ISDN Switchtype = basic-net3

Layer 1 Status:

ACTIVE

Layer 2 Status:

TEI = 64, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED

I_Queue_Len 0, UI_Queue_Len 0

Layer 3 Status:

0 Active Layer 3 Call(s)

Active dsl 0 CCBs = 0

The Free Channel Mask: 0x80000003

Number of L2 Discards = 0, L2 Session ID = 12

New Member

Re: ISDN

Can anyone help

New Member

Re: ISDN

broadcast statement required on dialer map

New Member

Re: ISDN

what is that ? and how do I set that up ?

105
Views
0
Helpful
7
Replies
CreatePlease login to create content