cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
935
Views
0
Helpful
6
Replies

ISIS over ATM

ianwarb
Level 1
Level 1

Guru's,

I am trying to form an ISIS adjacancy over a point to multipoint ATM link but it is not being created. I have configured an ATM sub-interface with map-groups as indicated in a NANOG document on ISIS. Can anyone point me in the right direction? I can successfully ping between the two interfaces.

6 Replies 6

xavierchang
Level 7
Level 7

What kind of ATM encapsulation are you using?

doug.lockwood
Level 1
Level 1

My understanding is that the only topologies that ISIS currently supports are Point-to-Point or Broadcast (full mesh). I recomend that you read "Routing TCP/IP, Vol 1" By Jeff Doyle.

It has a very clear explanation of the ISIS protocol.

Doug

ianwarb
Level 1
Level 1

I am using aal5mux.

There's your problem right there. Use SNAP.

thanks xavier, that worked perfectly

An interesting question to ask yourself is why MUX didn't work, but SNAP did. I know the answer of course, but I think it is more educational if you think about it for awhile, and maybe do some research on it. After doing that, if you're still stumped, come back, and I'll help you out.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: